In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Dual-Band) 2475SDB
Control Up to 1800 Watts of Lighting Without a Wall Switch
- Control hardwired lights and appliances without running wires for a wall switch
- Fits inside a standard electrical box
- Controls up to 20 Amps or 1800 Watts (incandescent) at 120 or 277VAC
- Featuring dual-band INSTEON technology for the fastest and most reliable performance
Control hardwired lights and appliances without a wall switch. Simply wire the In-LineLinc to your lighting or appliance fixture and link it to an INSTEON controller for fast, reliable remote control. No need to pull additional wires for a wall switch! This latest member of the In-LineLinc family works great in residential (120VAC) as well as commercial (277VAC) applications and offers a higher load switching capacity so you can control larger banks of lighting. In addition, this In-LineLinc Relay is dual-band, meaning it communicates simultaneously over both radio frequency (RF) and the powerline, increasing reliability while enhancing your INSTEON network.
Software configurable Using INSTEON software such as HomeRunner RBI, you can control, program and manage settings for In-LineLinc Relay and any other INSTEON devices in your network. You can even schedule timed events, receive email alerts when devices are activated and more. Learn more about HomeRunner RBI.
Add a Wireless Wall Switch Anywhere A INSTEON Mini Remote Switch can be wirelessly linked to the In-LineLinc Relay and mounted on any wall you where you want control (mounting kit sold separately). The INSTEON Mini Remote Switch looks like a standard decorator wall switch but is powered by a USB-rechargeable battery and can go for over a year without recharging under daily use. You can add as many as you want, providing a wireless switch at different points in the room or house. INSTEON also offers a Micro On/Off Module that wires in behind your existing switches or fixtures. This allows you to keep your existing antique, toggle or decorative wall switches while adding the customizable INSTEON remote control functionality.
Compatibility The In-LineLinc Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the In-LineLinc Relay can respond to X10 commands from an X10 controller and it can send X10 commands to X10 devices. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile Memory All In-LineLinc Relay settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-LineLinc Relay will return to its last on/off state when power is restored. .
Manufacturer Product No.: 2475SDB, In-LineLinc Relay - INSTEON Remote Control In-Line On/Off Switch (Dual-Band)
Patent No.: U.S. Patent No. 7,345,998, International patents pending
Warranty: 2 years, limited
Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, INSTEON confirmations, X10
LED Indicator: Off when load is on and vice versa
Multi-Way Circuit Support: Yes, as a receiver and as a controller
Setup Memory: Non-volatile EEPROM
INSTEON ID: 1
Maximum Scene Links: 417
Scene Commands Supported as Responder: On, Off
Software Configurable: Yes, Always
RF Range: 150' Open air
Mounting: Mounts inside lighting ballast box in the ceiling or in the wall
Wires: White - Neutral 18 gauge, Black - Hot 12 Gauge, Red - Load 12 Gauge, Copper - Earth Ground 12 Gauge
Operating Conditions: Indoors, 32 to 104° F, up to 85% relative humidity
Dimensions: 2.77" H x 1.75" W x 1.47" D
Weight: 4.2 ounces
Voltage: 120VAC +/- 10%, Single phase, 277VAC +/- 10%, One phase of a three phase system
Load Types: Wired-in incandescent lighting and inductive loads
Maximum Load: 20 Amps;1800 Watts (for incandescent loads)
Power Consumption: <1 Watt
Certification: Safety tested for use in USA and Canada (UL-508-2010, CSA C22.2 #14-2010)
X10 Features (applies to power line only)
X10 Primary Address: 1
X10 Status Response: Supported
X10 Powerline Frequency: 120 KHz
X10 Messages Repeated: No