OutletLinc Dimmer - INSTEON Remote Control Outlet (Dual Band) 2472D
Control Your Plug-In Devices with the World's First INSTEON-Compatible Decora-Style Outlet
Overview
- Winner of the 2012 Electronic House Products of the Year Award
- Elegant, built-in, clean and professional look for remote control of lamps
- One remotely controllable outlet and one standard (always on) outlet
- Tamper-resistant shutter mechanism for protection against improper object insertion and electric shock
- Controllable outlet supports "load sense" - manually switching load on (at load) will turn outlet on
- Auto-off, Over temp sensor
- Dual-band: communicates simultaneously over both radio frequency (RF) and the powerline
- Functions as an Access Point for RF-only devices
Essential Info
Say goodbye to plug-in lamp modules and get a clean, professional look with the new OutletLinc Dimmer. This revolutionary receptacle is the first of its kind to offer a built-in dimmer that can be remotely controlled from anywhere using devices such as a remote control, wall keypad or even your smartphone. The simple-to-use OutletLinc Dimmer has advanced features like an adjustable ramp rate that slowly brings the lamp on, a preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on initially, as well as load sense, so you can still use the lamp's built-in switch to turn the light on and off. It's made to be installed in place of any wall receptacle and controls incandescent loads up to 300 Watts. Also features a standard (always on) outlet rated up to 15 Amps.
More Info
Convenient For added convenience, the OutletLinc Dimmer bottom outlet is always on. So, whether you need an outlet in the hallway for the vacuum, or an outlet behind the living room couch for an INSTEON tabletop controller, you'll never have to worry about the outlet being switched off. Also, if you ever need to switch the top outlet on manually, you can either use OutletLinc's built-in ON/OFF button (located between its two outlets) or turn your lamp or appliance on and off with its own ON/OFF switch (with load sensing enabled).
X10 Compatible INSTEON OutletLinc Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.
Non-Volatile Memory All settings are stored in non-volatile memory and are not lost during power failures.
Certifications and Warranty All OutletLinc products are safety approved. The factory for SmartLabs Design Products is ISO9001 certified. Because of this passion for quality, Smarthome stands behind the entire line of products with a full 2-year warranty.
Specifications
General
Brand: INSTEON
Product Name: OutletLinc Dimmer - INSTEON Remote Control Dimmer Outlet (Dual-Band)
Manufacturer Product No.: 2472D
UPC:
White - 2472DWH: 813922010251,
Light Almond - 2472DLAL: 813922011630
Ivory - 2472DIV: 813922010244
Patent No.: 7,345,998, International Patents Pending
Warranty: 2 years, limited
INSTEON
INSTEON ID: 1
INSTEON: 256 responder groups & 1 controller group
Brightness Levels: 32 (256 with software)
Maximum Scene Links: 400
Scene Commands Supported as Controller:
On
Off
Fast On
Fast Off
Scene Commands Supported as Responder:
On
Off
Press & Bright
Press & Hold Dim
Incremental Bright
Incremental Dim
Fast On
Fast Off
Software Configurable:
Yes
Ramp Rates (full-ON to full-OFF): 1
RF Range: 150' Open air
X10 Support: Yes
X10 Addresses: 1 max, unassigned by default
INSTEON Device Category: 0x01 Dimmable Lighting Control
INSTEON Device Subcategory: 0x21
INSTEON Product Key (IPK): 0x000068
Mechanical
Mounting: Standard, single gang wall box
Wires:
Black - Hot
White - Neutral
Bare Copper - Ground
Case Color: White
Set Button: 1, color matched to unit
Plastic: UV Stabilized Polycarbonate
Beeper: Yes
LED: Dual Color, Green & Red
Weight: 120 grams / 0.26 pounds
Operating Environment: Indoors
Operating Temperature Range: Indoors, 32 to 104° F, up to 85% relative humidity
Thermal Overlaod Protection: Disabled controlled outlet until condition resolved and operated with ON command or front button push.
Electrical
Voltage: 120 VAC +/- 10%, Split, Single Phase
Frequency: 60Hz
Maximum Dimmer Load: 300 Watts
Load Type(s): Incandescent
Surge Resistance: Up to 500 VAC
Retains all settings without power: Yes, all saved in Non-volatile EEPROM
Standby power consumption: < 1 Watt
Safety Approved: Intertek (ETL)
Certifications: FCC, IC Canada, ETL