INSTEON PowerLinc Modem (Dual Band) USB or Serial Interface 2413

• Works with PowerHouse - INSTEON management software solution for PC
• Serial or USB connection (Select from pull-down menu above)
• Control INSTEON devices from compatible HA software
• Interface supports INSTEON extended messages
• Supports 1,000+ links

The INSTEON PowerLinc Modem is a USB or Serial interface based home automation interface that allows PC- and hardware-based automation controllers to control INSTEON compatible lights, appliances, heating/air conditioning systems and alarm systems directly via the INSTEON network. The dual-band interface sends and receives both powerline and radio frequency (RF) INSTEON signals, so it doubles as an Access Point. This makes it ideal for new INSTEON installations if you have or plan to use an RF-only INSTEON-compatible remote, thermostat, motion sensor or contact sensor. The RF signal can bypass electrical noise or attenuation near the PC and it pulls many of the "distant" INSTEON devices one hop closer, which can expand the size of potential installations into even larger homes and commercial buildings

Features:

• Built-in Dual-Band with RF function, acts like an Access Point or Range Extender for phase bridging and RF to/from power line
• 1023 links
• Beep sounder
• Red/Green LED light
• Supports faster reading and writing of the PLM's database by another controller
• Much lighter weight
• No pass-through outlet

Please Note: The controller connected to the INSTEON PowerLinc Modem must remain powered on and running the controller program connected to the controller or host at all times of usage. Additionally, the dual-band interface does not supply power to external devices.

Specifications:

Manufacturer Product No.:        2413U - PowerLinc Modem - INSTEON USB Interface (Dual-Band)

UPC:                                          891114000136

Patent No.:                                 U.S. Patent No. 7,345,998, International patents pending

General

Interface:                                    USB

Baud Rate:                                 19,200 Kbps

USB Current Draw:                    0 mA

USB ID:                                      VID: 0x403, PID: 0x6001

Operation

Status LED:                                Green + Red LED

Local Control:                             None

Operation Modes:                      INSTEON

Combo Memory:                        Non-volatile EEPROM

INSTEON Features

INSTEON Addresses:                1 hard-coded out of 16,777,216 possible

INSTEON Links:                        1,023

INSTEON Power Line Frequency:     131.65 KHz

INSTEON Device Category:     0x03 (Network Bridges)

INSTEON Device Sub-Category:      0x15

INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms

INSTEON Minimum Receive Level:  10 mV

INSTEON Messages Repeated:        Yes

Mechanical

Operating Conditions:                Indoors, 32 to 104° F, up to 85% relative humidity

Dimensions:                               3.9" H x 2.6" W x 1.5" D

Weight:                                       4.0 oz

Electrical

Supply Voltage:                          120 Volts AC +/- 20%, 60 Hertz, single phase

Certification:                               Safety tested for use in USA and Canada (ETL #3017581)