ZOOZ ZEN77 Z-WAVE PLUS S2 DIMMER SWITCH 800 SERIES

• Pin It

Turn your lights on, dim them, or turn them off from the wall dimmer or through Z-Wave.  Use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, chandeliers, fans, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended.  NEW in 800 series: smaller form factor, fits better in shallow or crowded boxes (just 1.1" deep); get it with almond, brown, or black paddles (sold separately, basic version comes in white).

What's the difference between the ZEN77 and the ZEN72 model? 

Custom Etching

You can now order a custom etched faceplate for your Scene Controller from Domotinc! Just click on the image below to customize your plate and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase.

Description

• NEW 800 chip: the latest S2 security, SmartStart for easy pairing and faster communication with better Z-Wave range!
• Simple Direct 3-Way & 4-Way: Less rewiring for more multi-point control scenarios like 4-ways and 5-ways where load and line are in separate boxes. Use it the same way as the ZEN27 dimmer. Neutral wire required.
  
• Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
• Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap*
• You choose the color and brightness level of the LED indicator*
• Programmable double tap and single tap for truly customized control*
  
• Adjustable ramp rate and maximum/minimum brightness levels*
  
• OTA firmware updates for a future-proof device
  
• Signal repeater will make your Z-Wave network more reliable
  
• Use a standard-size wall plate for single gang installations (wall plate not included)
  
• 5-year warranty and lifetime tech support
• Check out Zooz Light Switches & Dimmers FAQs

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

Specifications

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120 VAC, 60 Hz
• Maximum Load:100 W LED, 300 W incandescent
• Z-Wave Range: Up to 200 feet line of sight, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
• Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
• Operating Temperature: 32-104° F (0-40° C)
  
• Installation: Indoor use only

• WORKS WITH:

  • Z-Box Hub (recommended for Zooz products)
  • 2GIG (no advanced settings available)
  • Abode (no advanced settings available)
  • ADT Pulse (no advanced settings available)
  • Almond (Securify) (no advanced settings available)
  • Fibaro Home Center 2
  • Fibaro Home Center Lite
  • Home Assistant (Z-Wave JS)
  • HomeSeer
  • Hubitat
  • InControl
  • ISY
    
  • Ring (no advanced settings or scene control)
    
  • SmartThings (register your product  to access the custom lua driver for advanced functionality)
  • Wink and Wink 2 (no advanced settings)                                                                                      
  NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.