SwitchLinc On/Off - INSTEON (Dual-Band) Remote Control Switch (2477S)

$ 54.99

Similar in appearance to Switchlinc 2477D but On/OFF operation only.  Use for applications where dimming is not desired.


  • Remotely control any load type, such as fluorescent lights, fans and motors
  • Powerful 1800 Watt capacity
  • Supports 100-277V 50 or 60 Hertz AC electricity
  • Dual-band INSTEON technology for the fastest and most reliable performance- doubles as an Access Point

Essential Info

This non-dimming SwitchLinc connects lights, fans and other appliances to your INSTEON network giving you complete control from handheld remotes, wall keypads and more. The SwitchLinc installs like a traditional wall switch with the exception of requiring connection to neutral. Most homes have a neutral wire available. Once installed setup is quick and easy using a simple programming.

Scene Lighting This SwitchLinc Dimmer can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.). Scenes allow you to control multiple lights, rooms or even the whole home with a single command. This is an elegant feature usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. Use the INSTEON KeypadLinc Dimmer if you want to control multiple scenes from one controller. Compatibility The SwitchLinc Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that it can respond to an X10 power line command from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10. Dual-Band This SwitchLinc On/Off switch has the ability to control up to 1800 Watts and is dual band so it has the ability to communicate using both the electrical wires in the home (power line) as well as using radio frequency (RF). This increases reliability not only for the SwitchLinc but for all devices on an INSTEON home control network (similar to the function of an Access Point).



Manufacturer product no.: 2477S - SwitchLinc On/Off - INSTEON Remote Control On/Off Switch (Dual-Band)

UPC: White - 2477S: 813922012378 


Warranty: 2 years, limited


LED indicator: 8 white LEDs. Optional green, blue, amber or red LEDs with #2400L kit.

Operation modes: INSTEON only, X10 only, INSTEON and X10 combo mode

Combo mode message order: INSTEON, INSTEON cleanup, X10

Multi-way circuit support: One SwitchLinc Relay controls load, cross-link any number of SwitchLincs or other INSTEON Controllers

Setup memory: Non-volatile EEPROM

INSTEON Features

INSTEON addresses: 1 INSTEON, 400 responder groups and 1 controller group

Maximum scene memberships: 400 (combined controller + responder)

Scene commands supported as controller: On,Off, Fast-on, Fast-off, Begin brighten, End brighten, Begin dim, End dim

Scene commands supported as responder: On, Off, Fast-on, Fast-off

Software configurable, Yes

INSTEON power line frequency: 131.65 KHz

INSTEON minimum transmit level: 3.2 Vpp into 5 Ohms 

INSTEON minimum receive level: 10 mV

INSTEON messages repeated: Yes

Radio frequency: 915 MHz

RF Range >100' (open air)


Paddle Type: True rocker action

Wire Nuts: 4 included

Wires Line (Hot) - black, 12 AWG, Neutral - white, 18 AWG, Load - red, 12 AWG, Ground - bare copper, 12 AWG


Standard, single-gang wall box

Set button: Clear

Air gap: Set button when pulled out

Plastic: UV stabilized polycarbonate

Beeper: Yes

Setup LED: 1 red/green dual-color

Status LEDs: 2 white, can be dimmed or disabled (color change kits available)

Operating conditions: Indoors, 32-104°F, up to 85% relative humidity

Dimensions: 4.1" H x 1.78" W x 1.47" D

Weight: 4.2 oz


Supply voltage: 100-277VAC +/- 10%, 50/60Hz auto-detected at power-up

Neutral wire: Required

Power wire leads: 6", 12 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, Line (black), Load (red), 18 AWG Neutral (white)

Maximum load: 17 Amp resistive capacity (100-277 VAC), 1,800 Watt incandescent capacity (100-277 VAC), 1 HP motors (at 120 VAC only), 10 Amps ballast

Surge resistance: Up to 500 VAC

Retains all settings without power: Yes, saved in non-volatile EEPROM

Standby power consumption: <1 Watt

Safety approved: ETL (Intertek Testing Services)

Certification: Safety tested for use in USA and Canada

X10 Features (applies to power line only)

X10 primary address: 1 optional (comes unassigned)

X10 scene address: 256 maximum (unassigned by default)

X10 status response: Supported

X10 power line frequency: 120 KHz

X10 minimum transmit level: 3.2 Vpp into 5 Ohms

X10 minimum receive level: 20mV into 5 Ohms

X10 messages repeated: No

Innovative Home Systems is an Upfront Merchant on TheFind. Click for info.