INSTEON Water Leak Sensor 2852-222
Overview
- Just set on the floor - no screws, no tape, no wires!
- Receive leak alerts via texts and/or emails when used with INSTEON compatible automation controllers
- Use with our Motorized Water Shutoff Valves to automatically shut off water as a leak is detected
- Simply tap/tap link to lights to be visually alerted
- Daily "heartbeat" signal allows monitoring systems to ensure leak sensor continues to function and communications are OK
- Save $1,000's in undetected water damage (not to mention the hassle)
- 10+ year battery life (battery included)
- Fantastic when on vacation, for rental properties and 2nd homes
Essential Info
INSTEON Leak Sensor and Water Shut-Off Valve Application: This easy to use, battery powered leak sensor can provide the early detection necessary to prevent leaks from creating major damage to your home. The INSTEON Leak Sensor installs quickly and easily - no need to run wires or drill holes. Simply place the sensor near where water leaks may occur. Some common places are:
- Washing machines
- Toilets
- Water heaters
- Sinks
- Refrigerators (water filters)
- Dishwashers
- Basements
- Water Softeners
Please Note: At least one Insteon Dual Band device is required to allow communications between RF only Leak Sensors and power line only I/OLinc modules used with water shutoff valves. Please contact us if you need additional information.
More Info
Simple Design Other leak sensors on the market require running wires or drilling holes, the INSTEON Leak Sensor is an all-in-one design. This makes it super simple to install and ideal for placing in tight areas.
Long Lasting Battery Life A lithium battery is included with the INSTEON Leak Sensor and will provide over 10 years of operation. To add a level of security, the sensor also features a "heartbeat" signal which is sent daily. This can be used by central controllers and/or cloud services to notify you that the sensor is still functioning or in the absence of the signal that there is a problem.
Expandable Start with one, grow to dozens if you wish. INSTEON also offers motion and open/close (door/window) sensors.
Specifications
General
Brand: INSTEON
Manufacturer product no.: 2852-222, INSTEON Leak Sensor
UPC: 813922013078
Warranty: 2 years, limited
INSTEON
INSTEON powerline mesh repeater: No
INSTEON RF mesh repeater: No
INSTEON controller: Yes
INSTEON responder: No
Maximum links/scenes: 400
Commands supported as responder: On Group 1 (Dry), On Group 2 (Wet)
Heartbeat (Group 4)
Software configurable: Yes
RF range: Up to 150 feet (open air)
Phase bridge detect beacon: No
INSTEON device category: 0x10
INSTEON device subcategory: 0x08 (915MHz RF frequency)
Mechanical
Mounting: Place on flat surface where leak will occur
Case color: White
Buttons: 1, Set
Plastic: Polycarbonate
Rubber: Polyethylene rubber
Conductive Feet
Corrosion resistant nickel plated bronze
Beeper: No
Setup LED: Yes, green
Dimensions: Excluding antenna: 0.9" H x 3.6" W x 1.4 D (23mm H x 92mm W x 36mm D) With antenna: 3.7" H x 3.6" W x 1.4" D (93mm H x 92mm W x 36mm D)
Weight: 3 oz (0.2 lb, 90g)
Operating environment: Indoors
Operating temperature range: 32-104°F (0-40°C)
Operating humidity range: 0-90% relative humidity
Storage temperature range: -4-158°F (-20-70°C)
Electrical
Battery: One (1) AA lithium battery included
Voltage; 1.5VDC
Retains all settings without power: Yes, saved in non-volatile EEPROM
Mean battery life; 10 years
Certifications; FCC, IC Canada