ZOOZ ZEN30 Z-WAVE PLUS S2 DOUBLE SWITCH VER. 3.0 (WHITE) FOR LIGHT & FAN COMBO

$ 34.99

You asked, Zooz answered! One part light dimmer, one part 15A on/off relay, this Double Switch has endless use cases. Make it your go-to Z-Wave solution for existing stacked switches controlling a ceiling fan and lights on the fan. If you have two switches that control a fan and light separately (2 connections coming into the box, 1 for the motor and 1 for the light), use the Double Switch to combine them!

You can also use this device to control two sets of lights with one switch (one dimmable, one on/off), saving space in your box for another application. Or skip on the load for either the dimmer or relay, and use the Double Switch as a remote control for other scenes and devices in your Z-Wave network.

Besides fan control, the 15 A relay in the Double Switch is a dry contact that can be used in a variety of creative applications. Use it to add Z-Wave to an outlet receptacle or load from a different circuit.

The Double Switch supports OTA firmware updates so you’ll be able to take advantage of Zooz’s frequent upgrades and feature additions. And once added to your Z-Wave hub, the Double Switch will immediately start boosting Z-Wave signals to strengthen your connections and extend the range of other devices. It supports the newest S2 authenticated security protocol for secure communication, and its Z-Wave Plus 700 series chip ensures stable connections with your hub.

Description

Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
The first Z-Wave double wall switch!
Direct replacement for fan / light combo switches or other double switches in your home
Ver. 3.0: 700 series Z-Wave chip and improved dimmer components with triac driver
DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
Smart bulb ready: use scene control or simple automations to easily program smart bulb control with this switch without cutting power to them
NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-way's without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
Adjustable LED indicator: choose from 4 colors and 3 brightness levels
Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
White (no other color available - currently no plans for other colors)
S2 security with SmartStart for safer wireless communication
OTA firmware updates for a future-proof device
Built-in signal repeater to boost your Z-Wave network
Restores status after power failure
Air-gap switch for added safety
Use a standard-size wall plate for single gang installations (wall plate not included)
5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.

Specifications

Z-Wave Frequency: 908.42 MHz (US)
Power: 120 VAC, 60 Hz
Z-Wave Chip: 700 Series (VER. 3.0 only)
Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
Maximum Load for Relay: 15 A
Z-Wave Range: Up to 100 feet line of sight
Operating Temperature: 32-104° F (0-40° C)
Dimensions: 1.7" x 4.1" x 1.1"
Installation: Indoor use only
WORKS WITH: