I/O Linc - INSTEON Low Voltage / Contact Closure Interface (1 In/1 Out) 2450

$ 45.99

Expand your INSTEON Network to monitor and control low voltage and contact closure devices.

Overview
  • Monitor and control pool valves, electric door strikes, sensors and more using your INSTEON or X10 network
  • 4 output relay modes allow you to control many different types of devices
  • Control INSTEON lights and appliances using standard sensors
  • Contains 1 sensor input and 1 output relay (NO/NC)
  • Award-winning INSTEON technology provides superior performance and reliability

Essential Info

The latest INSTEON plug-in module, I/O Linc, lets you monitor and control any low voltage devices such as alarm sensors, electric door strikes, and contact closures as part of your INSTEON home automation network. With one dry-contact sensor input you can control many INSTEON devices throughout the house. Plus, use the built-in single-pole double-throw (SPDT) switch, connect any low voltage-powered device for continuous or momentary operation. I/O Linc is also backward-compatible with X10.

Required Accessories Sensor wire: 16 - 28 gauge wire fits, but 20 - 22 gauge recommended

I/O Linc Kits Available:

More Info

I/O Linc's flexible output relay can control many different types of low voltage devices, from pool valves to electric door strikes to garage doors due to its different relay modes. When controlling devices like pool valves, you will want the ability to leave it on for an extended period of time, giving it plenty of time to fill the pool. As it approaches the desired water level, then you can remotely turn it off. For devices like electric door strikes, set I/O Linc's output relay to momentary, allowing you open the front gate using a HomeRunner RBI or any other INSTEON controller.

Certifications and Warranty All I/O Linc products are safety approved.  Because of this passion for quality, INSTEON stands behind the entire I/O Linc line of products with a full 2-year warranty.

Specifications

General

Brand: INSTEON

Manufacturer Product No.: 2450, I/O Linc

UPC: 689076403542

Patent No.: U.S. Patent No. 7,345,998, International patents pending

Color: White

Warranty: 2 years, limited

Operation

Status LED: White (Bright when relay closed, dim when relay open)

Sensor Status LED: Green (On when sensor closed, Off when sensor open)

Set Button: Toggles output relay On/Off. Also used for setup.

Momentary Duration: Adjustable, 2 - 105 minutes

Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode

Combo Mode Message Order: INSTEON, INSTEON confirmation, X10

Multi-Way Circuit Support: Yes

Setup Memory: Non-volatile EEPROM

INSTEON Features

INSTEON Addresses: 1 hard-coded out of 16,777,216 possible

INSTEON Links: 417

INSTEON Powerline Frequency: 131.65 KHz

INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms

INSTEON Minimum Receive Level: 10 mV

INSTEON Messages Repeated: Yes

Mechanical

I/O Terminals: 5V (10mA), GND, Sense, N/C, N/O, Common (28-16 gauge wire)

Input jack: 1/8" mini jack input (GND, Sense)

Input Type: Contact closure only

Output Relay Capacity: 5A @ 30 Volts (AC or DC)

Operating Conditions: Indoors, 32 to 104°, up to 85% relative humidity

Dimensions: 4.5" H x 2.5" W x 1.5" D

Weight: 4.6 oz

Electrical

Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase

Sensor Input: 1/8" mini jack input (GND, Sense)

Power Plug : 3-pin grounded

Pass-through Outlet: Uncontrolled 3-prong (with ground), 120V, 15A

Power Consumption: 0.93 Watts

Certification: Safety tested for use in USA and Canada

X10 Features

X10 Primary Address: Two optional (comes unassigned). One for input, one for output

Innovative Home Systems is an Upfront Merchant on TheFind. Click for info.