Keypad Dimmer INSTEON (Dual-Band), 8-Button 2334-222
Best-Selling Remote-Controllable Keypad Dimmer Now with Dual-Band
- Two products in one: eight button controller and 600-watt dimmer
- Monitor and control eight different devices or sets of devices
- Create whole-house lighting scenes in minutes
- See at a glance the status of lights
- 6-button Keypad Dimmer also available
- Doubles as an Access Point
Replace an existing light switch with Keypad Dimmer to remotely control lights and appliances from a single wall switch location, all without running new wires. The Keypad Dimmer has a built-in 600-watt dimmer that is controlled by the top left button. The 7 other buttons can be linked wirelessly to control other lights or appliances in other parts of the house. All buttons feature backlit status LEDs so you can see at a glance which lights have been left on (or off). Some devices to control from the keypad include INSTEON LED Bulb, plug-in modules, wall switches, thermostats and even low-voltage control. The Keypad Dimmer installs like a traditional wall switch with the exception of requiring a connection to neutral which is available in most homes (If you are unsure if you have a neutral, see How to check if i have a neutral wire?). If you're looking for a simpler keypad, consider using INSTEON Keypad Dimmer Switch (Dual-Band), 6-Button. For an On/Off-only version of Keypad, try Keypad Switch - INSTEON 6-Button Scene Control Keypad with On/Off Switch.
Easy To Install The Keypad Dimmer is easy to install and set up and yet so affordable, you'll be able to replace many of your switches with Keypad Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.
Monitor Other Devices The buttons on the INSTEON Keypad Dimmer illuminate when on signals are sent and when signals are detected from other linked INSTEON devices. This allows monitoring of lights in other rooms, which is incredibly useful if you want to control lights that aren't easily seen from the location, like those in bedrooms, bathrooms, basements, garages, attics, etc.
Flexible Setup The Keypad gives you tremendous flexibility with controlling your lighting system. Other wall-mounted keypads only provide on/off control, each KeypadLinc button can perform up to four different functions. Press a button once for ON; press again for OFF. Press and hold to brighten, press and hold again to dim. If you prefer, turn off the toggle feature to send the same command every time. This is a helpful feature when programming an "all on" command button to press when you get home or "all off" command button to press when you leave for the day.
Brightness Levels Adjust the brightness level of the controlled light locally by pressing and holding the top or bottom button. This is especially helpful when you want to create a theatrical experience when watching your favorite movies. When you turn on the INSTEON Keypad Dimmer, it automatically comes on to full brightness. Setting the preset on level will make the dimmer stop at your preferred choice of 32 brightness levels. With software you can control brightness levels in 1% increments for ultimate flexibility. Each button has an elegant white LED that indicates the current on/off status of the lights being controlled. To match your room's décor, a 4-Color KeypadLinc LED Kit is available with four colors: red, blue, amber, and green.
Adjustable Ramp Rate You can also adjust the speed at which the controlled light turns on or off, known as the ramp rate. The ramp rate can extend up to 8 minutes (for a simulated sunrise or sunset) if programmed remotely.
Create Multi-Way Circuits The INSTEON KeypadLinc Dimmer allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3, 4, or 5-way circuit. First replace all of the existing switches you want to include in the circuit with either a Keypad Dimmer, INSTEON SwitchLinc Dimmer, or a INSTEON SwitchLinc On/Off (Non-Dimmable). The main dimmer must be connected to the standard wires, load, line, neutral, and ground. The secondary switches only need to be connected to line, neutral, and ground. No traveler wires are needed, so it is easy to place one of the switches wherever you need it. Note: Any time the Keypad Dimmer is placed directly adjacent to one another or any other electronic dimming switch, you must subtract 200 watts of capacity from each dimmer. If three dimmers are adjacent to one another, then 400 watts must be subtracted from the capacity of the center dimmer.
Insteon Heavy Duty 120-277V Loa...
from $ 149.99
INSTEON Hub 2245-222
KeypadLinc Dimmer - INSTEON (Dua...
from $ 79.99
- Automation Controllers & Displays
- Switches & Wired-in Devices
- Plug-in Devices & LED Bulbs
- Low Voltage Modules
- HVAC & Plumbing
- Safety, Security & Access Control
- Sensor Kits
- IR Devices
- Signal Enhancement & Testing
- Insteon Products
- ZOOZ Products
- Z-Wave Products
- ZigBee Products
- UPB Products
- Shelly Products
- WiFi Products
- X10 Products
- Bluetooth Products
- Clearance & Open Box Deals