ZOOZ ZEN72 Z-WAVE PLUS DIMMER 700 SERIES

• Pin It

Works with any dimmable LED bulb that accepts triac (forward-phase) dimmers up to 150 W total and with any incandescent bulbs up to 500 W. 

NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.

NEW in 700 series: smaller in the back so it fits easier in shallow or crowded boxes; replace the standard white paddles with almond, brown, or black paddles (sold separately).

Description

• Full brightness control of your lights, from the physical dimmer and via Z-Wave when added to your smart home hub (sold separately)
• NEW 700 chip: the latest S2 security, SmartStart for instant pairing and more Z-Wave coverage than ever!
  
• Direct 3-Way Solution: connects to an existing light switch for 2-point control, no add-on switch necessary! Wires just like the ZEN22 model. Neutral wire required, on/off control only from the secondary switch, use in 4-way installations only if you have direct connection to load and line in one box.
  
• Scene control: multi-tap triggers available on select hubs*
  
• Night Light Mode: press and hold the lower paddle when dimmer is off to turn the light on to low brightness
  
• Double tap to full brightness: now fully adjustable double tap and single tap behavior*
  
• Fully adjustable ramp rate*
  
• Don't use with fan motors, receptacles, or tube lights!
  
• Stronger signal repeater for a more reliable Z-Wave network 
  
• NEW: You choose the color and brightness level of the LED indicator*
  
• Fits a standard-size face plate for single and multi gang installations (face plate not included)
  
• 5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required. *Your hub needs to support advanced parameter input to display these features.

What's the difference between the ZEN72 and the ZEN77 model? 

Custom Etching

You can now order a custom etched faceplate for your Scene Controller from Domotinc! Just click on the image below to customize your plate and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase.

Specifications

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120 VAC, 60 Hz
• Maximum Loads: 500W Incandescent, 150W LED
• Range: Up to 200 feet line of sight
• Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only
• WORKS WITH:
• Z-Box Hub (recommended for Zooz products)
• 2GIG (no advanced settings or scene control)
• ADT Pulse (no advanced settings or scene control)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (Z-Wave JS)
• HomeSeer
• Hubitat
• InControl
• Indigo
• ISY994Zw
• openHAB
• Open Z-Wave
• Ring (no advanced settings or scene control)
• SmartThings (register your product here to access the custom lua driver for advanced functionality)
• Staples Connect DLink (no advanced settings - on/off control only)
• Wink and Wink 2 (no advanced settings)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product. NOT SUPPORTED BY VIVINT.