$ 37.99

Z-Wave Scene Controller Switch


  • On/off Z-Wave and manual control from the main button: use with 120V lights or fans under 3A
  • 4 smart buttons for remote control*
  • NEW 800 chip: more range, faster signal
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • SmartStart inclusion and S2 security to keep your network protected
  • Direct 3-Way Solution: no add-on switch needed, wires just like the ZEN21/ZEN71 model (Neutral required, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying)
  • Great for a regular single pole installation
  • Adjustable LED indicators: choose from different colors and brightness levels
  • Built-in range test tool: troubleshoot your network straight from the device
  • Scene control: trigger up to 35 scenes, control up to 35 devices (available on hubs that support multi-tap triggers*)
  • Smart bulb mode: disable the relay for truly wireless control or use as a remote control / smart add-on switch
  • Compatible with quality LED, CFL, and incandescent bulbs (don't connect to ballast tube lights, switched receptacles, or fans over 3A / 5 years old; NOTE: FEIT bulbs are not recommended)
  • Extra-strong repeater to expand the coverage of your Z-Wave network
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required. *Your smart hub / controller needs to support advanced settings and central scene programming or direct association access for you to take advantage of this feature.

Custom Etching

You can now order a custom etched faceplate for your Scene Controller from Domotinc! Just click on the image below to customize your plate and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase.


  • Z-Wave Frequency: 908.42 MHz (US)
  • Power: 120 VAC, 60 Hz
  • Maximum Loads: 960W Incandescent, 150W LED and CFL bulbs, 1800W (15A) Resistive, 3A fan motors
  • Z-Wave Range: Up to 500 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module
  • Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
  • Operating Temperature: 32-104° F (0-40° C)
  • Installation: Indoor use only
    • Z-Box Hub (recommended for Zooz products)
    • Fibaro Home Center Lite
    • Home Assistant (Z-Wave JS)
    • HomeSeer
    • Hubitat (platform version 2.2.6 or higher)
    • Indigo
    • SmartThings Hub (register your product here to access the custom lua driver for full functionality)

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

Innovative Home Systems is an Upfront Merchant on TheFind. Click for info.