ZOOZ ZEN17 Z-WAVE PLUS UNIVERSAL RELAY WITH 2 NO & NC RELAYS (20A, 10A) 800 SERIES

• Pin It

ZEN17 from ZOOZ provides 2 dry contact NO/NC relays up to 20A and 2 dry contact or 12-24v AC/DC inputs for a wide range of Z-Wave automation applications.

Description

• 2 NO or NC relays to turn almost any load into a Z-Wave device (use either the normally closed or normally open relay for R1 and R2 at a time)
  
• 2 Dry Contact or 12-24 V inputs to monitor HVAC systems, magnetic door sensors, or analog leak alarms (use either dry contact or 12-24 V input for R1 and R2 at a time, never apply voltage to the Sw terminals
• Automate up / down DC motors in screens, awnings, motorized blinds

• Control sprinkler systems, commercial gates, garage doors (will NOT work with MyQ or other smart openers), pool pumps, whole-house fans, landscape lighting, and more
  
• NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
• Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
• SmartStart and S2 authenticated security for a truly secure smart home
• Powered by USB C or 12-24 V (AC/DC): power supply NOT included (get it here)
  
• Use optional wall switches for manual control of connected devices
• Wall-mount ready 
• 5-year warranty and lifetime tech support
  
• US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)

NOTE: Z-Wave gateway controller required - sold separately.

Specifications

• Z-Wave Frequency: 908.42 MHz (US, CA, MX) Power: 12 - 24 V / USB C
• Maximum Load: NO relays: 20 A, NC Relays: 10 A
• Range: Up to 200 feet line of sight
• Powered by USB C or 12-24 V (AC/DC)
• Installation and Use: Indoor Only
• Operating Temperature: 32-104° F (0-40° C)
• Dimensions: 4" x 2.5" x 1.5"
• WORKS WITH:

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.