$ 34.99

You asked, Zooz answered! One part light dimmer, one part 15A on/off relay, this Double Switch has endless use cases. Make it your go-to Z-Wave solution for existing stacked switches controlling a ceiling fan and lights on the fan. If you have two switches that control a fan and light separately (2 connections coming into the box, 1 for the motor and 1 for the light), use the Double Switch to combine them!

You can also use this device to control two sets of lights with one switch (one dimmable, one on/off), saving space in your box for another application. Or skip on the load for either the dimmer or relay, and use the Double Switch as a remote control for other scenes and devices in your Z-Wave network.

Besides fan control, the 15 A relay in the Double Switch is a dry contact that can be used in a variety of creative applications. Use it to add Z-Wave to an outlet receptacle or load from a different circuit.

The Double Switch supports OTA firmware updates so you’ll be able to take advantage of Zooz’s frequent upgrades and feature additions. And once added to your Z-Wave hub, the Double Switch will immediately start boosting Z-Wave signals to strengthen your connections and extend the range of other devices. It supports the newest S2 authenticated security protocol for secure communication, and its Z-Wave Plus 700 series chip ensures stable connections with your hub.


  • Z-Wave Plus Dimmer (up to 75 W LEDs and 250 W incandescent) and On/Off Relay in one
  • The first Z-Wave double wall switch!
  • Direct replacement for fan / light combo switches or other double switches in your home
  • Ver. 3.0: 700 series Z-Wave chip and improved dimmer components with triac driver
  • DIMMER: double tap to full brightness, custom brightness level on, adjustable ramp rate and dimming speed, and more great features you've known Zooz for!*
  • RELAY: on/off control only, use it with ceiling fans or exhaust fans, built-in overload protection, dry contact relay for more creative applications, no load necessary so you can use it as a virtual switch or scene controller.
  • Scene Control (select hubs only): trigger up to 18 scenes or control up to 18 devices with multi-tap control.*
  • Smart bulb ready: use scene control or simple automations to easily program smart bulb control with this switch without cutting power to them
  • NO DIRECT 3-WAY: use in single pole set-ups only. Can be used in virtual 3-way's without any direct connections to the other switches in 3-way and 4-way installations. Contact us for details.
  • Adjustable LED indicator: choose from 4 colors and 3 brightness levels
  • Quick Installation: pigtail wires (wire nuts included), only 1.1" deep and no heatsink tabs for an easy fit
  • White (no other color available - currently no plans for other colors)
  • S2 security with SmartStart for safer wireless communication
  • OTA firmware updates for a future-proof device
  • Built-in signal repeater to boost your Z-Wave network
  • Restores status after power failure
  • Air-gap switch for added safety
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input to display these features.


  • Z-Wave Frequency: 908.42 MHz (US)
  • Power: 120 VAC, 60 Hz
  • Z-Wave Chip: 700 Series (VER. 3.0 only)
  • Maximum Load for Dimmer: 75 W LED, 250 W incandescent (don't use with tube lights, chandeliers, switched receptacles, or fans)
  • Maximum Load for Relay: 15 A
  • Z-Wave Range: Up to 100 feet line of sight
  • Operating Temperature: 32-104° F (0-40° C)
  • Dimensions: 1.7" x 4.1" x 1.1"
  • Installation: Indoor use only
    • Z-Box Hub (recommended for Zooz products)
    • Home Assistant (works best with device specific code, install here)
    • Hubitat (2.1.8 release or higher)
    • ISY
    • openHAB (2.5.1 or higher)
    • SmartThings (custom lua driver recommended, download it here)
    • Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Innovative Home Systems is an Upfront Merchant on TheFind. Click for info.