Zooz Z-Wave Plus Smoke and CO Detector Bridge ZEN55 800LR

$ 26.99

Quick reports to your hub for low-voltage trigger signals from your interconnected hard wired smoke and CO detectors by all major brands like First Alert, Kidde, and BRK (do NOT use with battery powered detectors)

Recognizes and reports both smoke and CO signals from interconnected hard wired analog detectors individually

DESCRIPTION

Quick reports to your hub for low-voltage trigger signals from your interconnected hard wired smoke and CO detectors by all major brands like First Alert, Kidde, and BRK (do NOT use with battery powered detectors)
Recognizes and reports both smoke and CO signals from interconnected hard wired analog detectors individually
NOTE: This is NOT a security alarm component and the device is NOT part of a life-safety system. Check local regulations before installing.
Optional 120 V relay to control lighting or a security siren
800 series Z-Wave chip: faster communication and more reliable network
Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags
Built-in signal repeater: keep your mesh network stable and your system fast (not applicable to Long Range installations)
SmartStart and S2 authenticated security for a truly protected smart home
Installs in any interconnected detector box; the last box is recommended as it has fewer wires (check your wiring first and always follow the diagrams in the manual).
Pigtail wires included for quicker set-up
5-year extended warranty when registered and tech support forever

NOTE: Z-Wave gateway controller required - sold separately.

SPECIFICATIONS

Z-Wave Frequency: 908.42 MHz (US)
Power: 120-240 VAC, 50/60 Hz
Maximum Loads: 10 A
Z-Wave Range: Up to 300 feet line of sight (or up to a mile with Long Range enabled)
Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
Operating Temperature: 32-104° F (0-40° C)
Installation: Indoor use only