Zooz Z-Wave Long Range 700 Series Titan Water Valve Actuator ZAC36 LR

$ 169.99

Automatic shut-off: connect the Titan valve actuator to your Z-Wave hub to close your water valve automatically anytime a leak is detected on any of the connecter water sensors.

Description

For 0.5" - 1.25" ball valves only, Please check your water valve for compatibility first. You'll need 3" clearance to each side from the center of the valve, 1" clearance between the pipe and the wall, and at least 1.25" clearance between the valve handle and the pipe.

A wired leak sensor probe is included to shut your water off even if the hub is offline or if you don't have a Z-Wave controller at all! Install the actuator outdoors if this is where your water main is. Add extra peace of mind with a smart power pack for the Titan. The Titan automatically shuts down right before the battery is fully drained, thanks to its smart auto shut-off feature. Contact us for additional information on this additional cost option.

Tool-free DIY installation. You'll be done in less than 5 minutes! Remember to install and calibrate the valve before testing it. Extremely powerful, the Titan actuator auto-calibrates and tackles even the most stubborn valves.

Coverage up to 1 mile if your hub supports Long Range. 5-year warranty and lifetime tech support.

Specifications

Valve Requirements: 0.5" - 1.25" ball valves only
Installation Requirements: 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall.
Water Leak Probe Length: 4.75 feet
Z-Wave Region: US / CA / MX
Z-Wave Chip: 700 series
Power: 12 V DC (1 A) power supply (included)
Power Cord Length: 9.5 feet
Temperature Sensor Range: -40° – 257° F
Sound Indicator: up to 85 dB
Wireless Range: Up to 400 feet line of sight (up to 130 feet indoors)
Operating Temperature: 14° – 122° F
Dimensions: 5.5" long x 2.25" wide x 5" tall
Installation: Indoor or outdoor use (IP66)