INSTEON Micro Open/Close Motor Control Module 2444-222

• Pin It

Add INSTEON Remote Control to Window Shutters, Blinds, Projector Screens and More

Overview

• Control motorized projection screens, window shutters, blinds and more
• The smallest inline module ever! Fits into almost all boxes
• Sense wires allow for control via a connected, hard-wired switch
• Compatible with latching switches as well as single momentary and dual momentary switches

Essential Info

Want to add wireless remote control to your automated window shutters, blinds and projector screens? INSTEON makes it easy. Micro Open/Close Module is the first INSTEON device designed specifically for up/down and open/close motor-controlled appliances. By including the Micro Open/Close module as a part of your INSTEON home automation network, you will enjoy remote control of your shutters, blinds, screens and more. This compact module installs behind your existing switch, giving it full INSTEON automation while retaining local control at the switch by way of sense wires. The patented INSTEON dual-band communication reliably sends signals over existing electrical wires (powerline) in your home and via radio frequency (RF). Micro Open/Close Module is so tiny that it can even be installed as an in-line module within a fixture box (like an In-LineLinc), providing remote control without running legs for a wall switch. INSTEON also offers a Micro Dimmer Module and a Micro On/Off Module.

More Info

INSTEON Micro Open/Close is compatible with latching, single momentary and dual momentary switches. By default, it comes programmed for latching switches such as paddles and toggles; it is easily configured for single and dual momentary switches with a simple reprogramming procedure during installation. Due to its hidden nature, we highly recommend using a home management controller HomeRunner RBI or the free INSTEON app with INSTEON Hub to manage Micro Open/Close.

General

Product Name: INSTEON Micro Open/Close

Brand/Manufacturer: INSTEON

Manufacturer Product No.: 2444-222

UPC: 813922012767

Warranty: 2 years, limited

INSTEON

INSTEON: Controller and responder

Maximum links/scenes: 400

Status LED: Green when load is on, red when load is off , Blinks red once when responder does not acknowledge/blinks green once if all responders acknowledge (can be disabled via software), Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)

LED brightness: Adjustable from off to 100% bright

Local control: Yes

Commands supported as controller: On, Off, Fast on, Fast off, Begin brighten, End brighten, Begin dim, End dim

Commands supported as responder: Open (on), Close (off), Fast on, Fast off, Begin raise (brighten), End raise (brighten), Begin lower (dim), End lower (dim), Beep

Software configurable: Yes

RF range: Up to 164 feet open air (may vary due to local interference)

Phase detect beacon: Yes

X10 support: Yes

X10 addresses: Any 1 of 256 (unassigned by default)

INSTEON device category: 0x0E window coverings

INSTEON device subcategory: 2444-222 (915MHz), 0x01

Mechanical

Mounting: Behind switch or above fixture in single-gang electrical box

Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm²,Sense 2 (purple): 24 AWG, 0.205mm²

Max. cable size: 4mm² 12 AWG (2.72mm diameter) 

Min. cable size: 1.5mm², 15 AWG

Screw clamp connections: Line, Load 1, Load 2, Neutral

Case color: White

Set button: Yes

Plastic: UV stabilized ABS+PC

Beeper: Yes

Beep on button press: Beeps when button is pressed or connected switch is tapped (must be enabled via software)

LED: 1 RGB

Dimensions: 1.8"H x 1.8"W x 0.6"D

Weight: 2.52 oz

Operating environment: Indoors

Operating temperature range: 32° to 104°F (0° to 40°C)

Operating humidity range: 0-90% relative humidity

Storage temperature range: -4° to 158°F (-20° to 70°C)

Electrical

Voltage: 100VAC to 240VAC

Frequency: 50/60Hz auto-detected at power-up

Load types: Resistive, Motor

Hardwired remote control: Yes, dual momentary switches supported

Retain all settings without power: Yes, saved in non-volatile EEPROM

Standby power consumption: <1W

Safety approved: ETL

Certifications: FCC, UL, IEC, EN

FCC ID: SBPMM01