CLXC-C1 Brass Totalizing Water Meter with Pulse/Reed Switch Output for Non-Potable Water
Use with INSTEON EZFlora, I/OLinc or other low voltage module to send water usage information in one or ten gallon increments to a suitable automation controller like HomeRunner RBI. Use this information to accurately monitor and control water usage for irrigation, humidification, hydroponic gardening, or other applications. Contact us if you have any questions concerning water meter or automation controller configuration.
These brass meters have 2% lead content which is currently acceptable in Canada and Europe. We recommend CLXC-P or MJ-SDC meters for use with potable water.
Water meters are special order items. Shipping usually takes about 1 week.
Single-jet dry type totalizing water meters. They are an ideal choice for a range of automated water use monitoring applications.
A pulse output of one pulse per gallon or 10 gallons is available. A 1.5 meter (59") length of 2-conductor wire 3.5 mm diameter is standard. One conductor has red insulation and one has black.Max Voltage: 24V AC/DC, Max Current: 0.01 A, Output Bounce Time: 0.01 second. Front panel readout indicates total water usage.
Meters are produced in an ISO9001 certified production facility and conform to International Standard ISO4064.
Measuring Principle: Single Jet
Meter Type: Dry, magnetic coupling between rotor and register movement
Meter Sizes: 1/2", 3/4"
Max Media Temperature:
Cold Water Meter: 122°F (50°C)
Hot Water Meter: 194°F (90°C)
Max Operating Pressure: 150 PSI
Proof Pressure: 300 PSI
Main Casing: Brass (CuZn40Pb2)
Register Box Rings: Brass (CuZn40Pb2)
Transparent Cover: Polycarbonate
Measuring Rotor: Polycarbonate
Rotor Spindles: 304 Austenitic Stainless Steel
Upper Plate: Polycarbonate
Bottom Plate: Polycarbonate
Register Gear Trains: POM
Worm Gear: POM
Registration Accuracy, with water <80°F (27°C): Normal Test Flow Range (Table 1): ±2%
Pressure Drop:15 PSI Max
Installation: Horizontal orientation recommended
Casing Spud Connections: External straight threads according to ANSI/ASME B1.20.1.See Dimensions, Connections and Weights (Table 2) for details.
Standard Accessories: Each meter is supplied with meter coupling (tailpiece) sets; includes 2 couplings and 2 gaskets
The pulse emitter consists of a plastic housing with a reed switch that is closed when a magnet mounted on one of the meters register gears comes into its activation proximity.