ZOOZ ZEN20 Z-WAVE PLUS S2 POWER STRIP VER. 3.0
The Zooz Z-Wave Plus Power Strip is the smartest way to power up your everyday devices, like your laptop, lighting, entertainment, and audio equipment. Remotely check if a device is powered and switch it on or off with your mobile device. Automatically turn on all or one of the the power strip outlets at a specific time every day based on your schedule and needs.
Create events that allow it to communicate with other Z-Wave devices — open the front door, turn off the power strip. Use the built-in timer to automatically turn designated outlets off after a fixed amount of time for added parental control. Monitor power use and optimize energy draw in your home or office.
5 Z-Wave Plus power outlets for wireless control of small appliances and electronics (total under 15 A resistive load)
2 USB ports for phone / tablet chargers report on / off status to the hub (NO Z-Wave control)
- NEW IN VERSION 3: enhanced hardware protection against high inrush current from low quality power adapters
- Control each outlet individually or all at once via Z-Wave (individual local control from each button)
- Power monitoring in every outlet*
Wall mounting and flat angled plug for cleaner installation
- 500 series chip for faster, more reliable connectivity
- NEW S2 security protocol (S2 unauthenticated)
- Built-in signal repeater to strengthen Z-Wave network
- Remembers and restores on/off status after power outage
- Blue LED indicators signal status and communication in progress
- 1-year warranty + lifetime tech support
NOTE: Z-Wave gateway controller required - sold separately.
*You need a controller which supports energy reports to take full advantage of the product.
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 110V
- Maximum Load: 15Amps TOTAL between 5 outlets
- USB Charging Port Power: 5V up to 2.1 A
- Cord: 2.5'
- Range: Up to 100 feet (30m) line of sight
- Installation and Use: Indoor Only
- Operating Temperature: 32-104° F (0-40° C)
- Dimensions: 11" x 2.5" x 1"
- Weight: 13oz