ZOOZ ZSE70 Z-WAVE PLUS S2 OUTDOOR MOTION SENSOR VER. 2.0 (BATTERY OR AC POWER)

• Pin It

OUTDOOR MULTISENSOR

This product replaces the discontinued Zooz ZSE29 Outdoor Motion Sensor. 

BETA RELEASE: You may need to updated your firmware in the near future. Your hub may not fully support this device at the time of purchase.  

Our response to your need for an outdoor-ready motion sensor. Pair this S2 Motion Sensor with your Z-Wave hub for quick and reliable motion alerts via text and email. Use it for seamless automation of your garage door or outdoor lights. Create the perfect “Welcome Home” and “Leaving for Work” routines to make your mornings more efficient and evenings more comfortable. Use it to enhance your home’s security and be kept in the loop with what’s happening at home.

Customize the motion time-out interval and lux trigger levels directly at the sensor for simplified control. This unit can be powered by standard batteries or power adapter. For those of you with super cold winters (around -20 degrees), we recommend using AC power supply (sold separately) for hassle-free automation. Be notified if the sensor’s back cover is removed unexpectedly with its built-in tamper switch. It also supports the latest S2 security protocol for the most advanced smart home encryption available.

Description

• Security alerts: Get instant motion reports to your Z-Wave hub whenever movement is detected.
• More climate data: Monitor temperature outdoors or indoors and use this information to trigger connected devices in your system.
  
• Smart lighting: program your Z-Wave outdoor lights to come on when the Zooz sensor reports motion and lux levels below your preferred set point
  
• Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
• Power it with 2 CR123A batteries (included) or a 12-24 V AC/DC connection (sold separately)
  
• Works as Z-Wave signal repeater when powered with 12-24 V AC/DC (do NOT pair the sensor on USB cable and then switch to batteries)
• 800 series Z-Wave chip: more range for reliable wireless communication
  
• SmartStart and S2 authenticated security
• Advanced settings to customize your sensor, including the ability to disable reporting for any sensor
•  CHECK HUB COMPATIBILITY BEFORE BUYING (NOT SUPPORTED BY WINK OR ALARM PANELS) 
• Modern minimal design with a multi-directional mini mounting bracket
  
• Extended 5-year warranty (if registered within 30 days of purchase) and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.

Specifications

• Z-Wave Region: US / CA / MX
• Z-Wave Chip: 800 series
• Power: 2 CR123A battery (included) / 12-24 V AC/DC (sold separately)
• Z-Wave Range: Up to 150 feet line of sight (or up to 1300 feet with Long Range enabled)
• Motion Detection: 30 feet
• Operating Humidity: 8%- 100% non-condensing
• Light Sensor Detection Range: 0 – 65535 lux
• Operating Temperature: 14°F to 122°F (with accuracy of ±2°C)
• Dimensions: 2.34” x 2.4” x 2.75”
• Installation: Indoor / Outdoor (IP66 rated)

WORKS WITH:

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.